Adjust the drill bit ring to the appropriate depth, lock the screw .
Use the lock wrench to fix the inclined hole in the proper position of the board .
The drill is inserted into the guide sleeve and open the drill hole to make holes.
Use screwdriver to lockscrew.
Plastic cap on cover .
Adjusting the number of corresponding scale according to the thickness of the plank
Adjust the depth of the bit limit of the bit, and the bit point should be separated from the adjusting plate 3mm
After the drill is inserted into the board in the guide sleeve, the bit first increases 5mm
Open the electric drill up to 1000 and start down the hole
The lower pressure clamp of the electric drill 15mm needs slow down pressure and is accelerated after entering
1x Lock wrench
1x Cross screwdriver
1X Slant-hole device
1X Hex wrench
1X Limit ring
2X Twist drill
A package of screws and plug
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.